Fixation of Nitrogen (N2) to Ammonia (NH3) is an essential process for maintaining life on earth. Currently, Ammonia (NH3) production is dominated by the Haber–Bosch process. It operates under conditions of high temperature 400–500 °C and pressure 200–250 bar, and its production has a huge carbon footprint. The H2 precursor, usually obtained by steam reforming of methane, also has a very large carbon footprint. Notably, the entire energy required to prepare the reagents and to operate the Haber-Bosch process amounts to 1–3% of the global energy supply. In stark contrast, in the natural world, plants and bacteria have been producing NH3 from N2 and solvated protons under ambient conditions, enabled by the FeMo cofactor of the metalloenzyme nitrogenase (N2 + 6H+ 6e-→2NH3). Inspired by this biological nitrogen fixation process, intensive efforts have been devoted to finding ways to mimic the process under similarly mild conditions.
Haber Bosch enables fertilizer and supported world population growth from 1.6 billion to 7.6 billion
The Haber-Bosch process uses a catalyst or container made of iron or ruthenium with an inside temperature of over 800̊F (426̊C) and a pressure of around 200 atmospheres to force nitrogen and hydrogen together. The elements then move out of the catalyst and into industrial reactors where the elements are eventually converted into fluid ammonia (Rae-Dupree, 2011). The fluid ammonia is then used to create fertilizers.
80 percent of the global increase in consumption of nitrogen fertilizers between 2000 and 2009 came from India and China.
Bread from the Air Haber-Bosch Process allowed for population growth
New nanomembrane process could save 2% of world energy
Today chemical fertilizers contribute to about half of the nitrogen put into global agriculture and this number is higher in developed countries.
To this end, the electrocatalytic N2 reduction reaction (NRR) conducted in an aqueous media has recently been receiving increasing attention. This approach offers multiple merits: (i) use of water as the hydrogen source, (ii) operation under ambient conditions, and (iii) utilization of renewable electricity to drive the process
For the first time that hierarchically structured nitrogen-doped nanoporous carbon membranes (NCMs) can electrochemically convert N2 into NH3 at room temperature and atmospheric pressure in an acidic aqueous solution. The Faradaic efficiency and rate of NH3 production using the metal-free NCM electrode in 0.1 M HCl solution are as high as 5.2% and 0.08 g m2 h-1, respectively. Upon functionalization of the NCM electrode with Au nanoparticles (Au NPs), the efficiency and rate are boosted to a remarkable 22% and 0.36 g m-2 h-1, respectively. These performance metrics are unprecedented for the electrocatalytic production of NH3 from N2 under ambient conditions.
Ammonia, key precursor for fertilizer production, convenient hydrogen carrier and emerging clean fuel, plays a pivotal role in sustaining life on earth. Currently, the main route for NH3 synthesis is via the heterogeneous catalytic Haber-Bosch process (N2+3H2 – 2NH3), which proceeds under extreme conditions of temperature and pressure with a very large carbon footprint. Herein we report that a pristine nitrogen-doped nanoporous graphitic carbon membrane (NCM) can electrochemically convert N2 into NH3 in an aqueous acidic solution under ambient conditions. The Faradaic efficiency and rate of production of NH3 on the NCM electrode reach 5.2% and 0.08 g m-2 h-1, respectively. After functionalization of the NCM with Au nanoparticles (Au NPs) these performance metrics are dramatically enhanced to 22% and 0.36 g m-2 h-1, respectively. These efficiencies and rates for the production of NH3 at room temperature and atmospheric pressure are unprecedented. As this system offers the potential to be scaled to industrial proportions there is a high likelihood it might displace the century-old Haber-Bosch process.
Brian Wang is a Futurist Thought Leader and a popular Science blogger with 1 million readers per month. His blog Nextbigfuture.com is ranked #1 Science News Blog. It covers many disruptive technology and trends including Space, Robotics, Artificial Intelligence, Medicine, Anti-aging Biotechnology, and Nanotechnology.
Known for identifying cutting edge technologies, he is currently a Co-Founder of a startup and fundraiser for high potential early-stage companies. He is the Head of Research for Allocations for deep technology investments and an Angel Investor at Space Angels.
A frequent speaker at corporations, he has been a TEDx speaker, a Singularity University speaker and guest at numerous interviews for radio and podcasts. He is open to public speaking and advising engagements.
